San Francisco / Livermore
Livermore has 85,522 residents (give or take 68) (ACS 2020-2024 5-year, table B01003, https://data.census.gov/table/ACSDT5Y2024.B01003?g=160XX00US0641992, checked 2026-10-19), about 3,219 people per square mile.
Livermore is about 70 miles from the Census center point for San Francisco in a straight line and covers 26.57 square miles of land (Census 2024 Gazetteer internal points and land area, https://www2.census.gov/geo/docs/maps-data/data/gazetteer/2024_Gazetteer/, checked 2026-10-19).
3,219 people per square mile puts Livermore in suburban density, where the outdoor unit usually sits in a side yard and the noise is not an issue for neighbors.
Of the 30,922 occupied homes in Livermore, 69% heat with natural gas, 0% with heating oil, 26% with electricity and 2% with propane (ACS 2020-2024 5-year, table B25040, https://data.census.gov/table/ACSDT5Y2024.B25040?g=160XX00US0641992, checked 2026-10-19).
Gas heats 69% of Livermore against electricity at 26%, and a cold-climate heat pump sized for this market replaces the gas system outright, so the usual quote is a whole-home install.
Livermore has about the Alameda County oil share of 0% and 4 points less electric heat than the county's 30% (ACS 2020-2024 5-year, table B25040, https://data.census.gov/table/ACSDT5Y2024.B25040?g=050XX00US06001, checked 2026-10-19).
Livermore has 31,936 housing units, 3% built before 1940 and 52% before 1980, with 20% built in 2000 or later (ACS 2020-2024 5-year, table B25034, https://data.census.gov/table/ACSDT5Y2024.B25034?g=160XX00US0641992, checked 2026-10-19).
Livermore has 17 points fewer pre-1940 homes than Alameda County as a whole (20%) and 5 points more homes built after 2000 than the county's 15% (ACS 2020-2024 5-year, table B25034, https://data.census.gov/table/ACSDT5Y2024.B25034?g=050XX00US06001, checked 2026-10-19).
The median Livermore home was built in 1979 (ACS 2020-2024 5-year, table B25035, https://data.census.gov/table/ACSDT5Y2024.B25035?g=160XX00US0641992, checked 2026-10-19) and the median home has 5.8 rooms (ACS 2020-2024 5-year, table B25018, https://data.census.gov/table/ACSDT5Y2024.B25018?g=160XX00US0641992, checked 2026-10-19).
69% of Livermore homes are single-family detached, 3% are in two- to four-unit buildings and 14% are in buildings of five or more units (ACS 2020-2024 5-year, table B25024, https://data.census.gov/table/ACSDT5Y2024.B25024?g=160XX00US0641992, checked 2026-10-19).
28% of Livermore homes are rented (ACS 2020-2024 5-year, table B25003, https://data.census.gov/table/ACSDT5Y2024.B25003?g=160XX00US0641992, checked 2026-10-19), so beside the 69% detached houses there is a real share of jobs where the landlord, not the resident, signs the quote.
Livermore has 18 points more detached houses than Alameda County overall (51%) and 15 points fewer five-plus-unit buildings than the county's 29% (ACS 2020-2024 5-year, table B25024, https://data.census.gov/table/ACSDT5Y2024.B25024?g=050XX00US06001, checked 2026-10-19).
No electric utility is on file for Livermore on this door yet, so this page does not name one; the name on the bill decides which rebate path applies.
LADWP Consumer Rebate Program heat pump HVAC, run by LADWP, is a live program for California addresses and publishes its terms without one headline figure (registry row 24 verified 2026-10-14, https://www.ladwp.com/residential-services/assistance-programs/consumer-rebate-program, checked 2026-10-16); confirm eligibility for the Livermore address before counting it. With 26% of Livermore homes already on electric heat and 71% on gas, oil or propane, the row that applies depends on the name on the electric bill and the fuel coming out.
Median household income in Livermore is $160,775 (ACS 2020-2024 5-year, table B19013, https://data.census.gov/table/ACSDT5Y2024.B19013?g=160XX00US0641992, checked 2026-10-19); many state and utility heat pump rebate programs set higher incentive tiers for income-qualifying households, so the household income on the application, not the town median, decides which level applies.
Heating design temperature: 27F. Source: ENERGY STAR Design Temperature Limit Reference Guide (2019 Edition), Alameda County row, 99% heating, PDF pages 11 to 13 of 141 (Revised 11/11/2020), https://www.energystar.gov/sites/default/files/Design%20Temperature%20Limit%20Reference%20Guide%20(2019%20Ed)%20-%20ENERGY%20STAR%20Single-Family%20New%20Homes_Rev11.pdf, fetched 2026-10-19, 99%.
That 27F figure is the Alameda County cold-day number a Livermore heat pump is sized against, so ask the installer to show the system's heating output at 27F, not at the milder rating-label temperature.
Ask whether the quote is whole-home or partial-home, because with 69% of Livermore on gas and 26% already electric the two paths carry different rebate figures and different sizing.
Ask for the heat-loss calculation room by room; the median Livermore home has 5.8 rooms and was built around 1979, and the count of heads and the tonnage follow the rooms and the insulation, not the square footage.
The form on this page is the follow-up for Livermore. The public number is the number the contractor quotes from.
No local contractor is named on this door for Livermore yet. A request from this page goes to the first licensed shop that takes the door.